DILUTION rates

Please note, dilution rates listed below are to be used as guidelines only.

Mulch or ground cover must be dry and stay dry for at least 24 hours to achieve maximum bonding power. Mulch should not be damp or wet before spraying for proper bonding power. (Make sure to turn sprinkler systems off after initial application.)

Dilute LANDSCAPE LOCK immediately prior to application, measuring the required quantity of LANDSCAPE LOCK into a bucket or spray tank, adding the measured quantity of water. Mix well with a paddle or shake the spray tank well until thoroughly blended.

Apply LANDSCAPE LOCK using a garden pressure spray pump with the nozzle held between 10 and 40 centimetres above the mulch surface, depending upon the type of nozzle. A garden watering can may be used but care needs be taken to ensure overall coverage.

Cleaning

THOROUGHLY CLEAN THE NOZZLE WITH FRESH WATER IMMEDIATELY AFTER USE AND PRIOR TO THE ADHESIVE SETTING IN THE NOZZLE.

Have a bucket of fresh water available to dip the spray nozzle into to store for a short period before re-using.

In case of spillage, LANDSCAPE LOCK can be cleaned up with water.

For any additional questions, contact our head office on 07 3279 2554